Dongfang Fence Post Co. E-mail: mail@fencepost.net.cn
Dongfang Fence Post Co. Dongfang Fence Post Co. 
Y Shaped Fence Post is a steel post named for its shape. The post is made of round tube or square tube, with the post top welded into a Y shape, for easy supporting of barbed wire, concertina barbed wire along various fencing mesh panels to construct secuity fencing systems. We supply standard Y post and special for Australia market.
The advantages of Y shape fence post
Y post is not only beautiful, but also can hook the concertina barbed wire on it, which greatly enhances the safety performance of the wire mesh fences when applied in security fencing project for airports and prisons.
The y post is simple to be used with various mesh fencing panels, suitable for Dutch net, weld net fence, for temporary and permanent protection.
Galvanized steel fence post, y shape, according to attached drawing:
Galvanized Studded T Post or Y type fence post
Details:
1.8m@ 1.58kg/m
1.8m@ 2.01kg/m
2.1m @ 1.58kg/m
2.1m @2.01kg/m
Y shaped fence posts, steel pipe post, 3m length
Made of 60mm +/-5mm steel pipe 2mm thickness, galvanized and painted.
V angle 45degrees and length not less 400mm
Overall length should be at least 3Meters.
Y Type Post Applications - for Fencing Projects
Project One - Y Arm Post for Perimeter Fence
Perimeter fences, design with all details as following, supplied with post, mesh, barbed wire or concertina wire, steel cable, installation tool and accessories.
1. Fence height:ground to top of mesh-2000mm
Mesh height : 2500mm( extra 0.5m buried mesh),3.05mm wire dia (0.120"=11gauge)x 50.8mm (2") mesh
2. Foundation post: minimum 700mm below ground
3. Zinc coating: 160g
4. Y shaped posts for wiring: 0.5m Y-arm for attaching barbed wire (minimum 3 rows per arm at 250mm spacing) or BTO22 concertina barbed wire(stretched diameter of 820mm).
5. Every camp fence must include 2 vehicle swing gates(3000mm width) and 2 pedestrian gates(1500 mm width), also tension system.
6. Post not less than 76mm overall diameter and tube wall thickness to be 2.6mm minimum for the line posts and 3.6mm minimum for end and corner post.
7. Steel cable that meets a K4 for the vehicle entry point that is aligned with a fence line,on either side of the entry,that also has the same level of protection. A K-4 rated fence solution would be able to stop a 15000 lb vehicle traveling at 30 mph.
8. Total 10 sets specialized installation tools required for fence installation.
Y-arm for attaching BTO22 concertina barbed wire, for high security perimeter fencing
Fence Project Example 2 - Y Top Post for Welded Mesh Panels Fence with Gate
| S/N | ITEMS | DESCRIPTION | Unit |
| 1 | FENCE PANEL | 2.5m H x 3m W, 12.7 x 76.2mm MESH OPENING, 5mm WIRE DIAMETER, galvanized + pvc powder coating | PANEL |
| 2 | FENCE POST | SHS 80x80x2.0mm, 3m LENGTH WITH ALLOWANCE FOR BOLTED Y TYPE POST TOP | POST |
| 3 | FENCE POST WITH BASE PLATE | SHS 80x80x2.0mm, 2.5m LENGTH WITH ALLOWANCE FOR BOLTED Y TYPE POST TOP | POST |
| 4 | ANCHOR BOLTS | M12 HEX FLANGE NUT SLEEVE ANCHOR, 316 Stainless steel | EACH |
| 5 | POST TOP | Y TYPE POST TOP | EACH |
| 6 | 9M WIDE DOUBLE LEAF TRUCK GATE | 2.5m H x 9m W, 12.7 x 76.2mm MESH OPENING, 5mm WIRE DIAMETER WITH ACCESSORIES | SET |
| 7 | PEDESTRIAN GATE | 2.5m H x 1.2m W, 12.7 x 76.2mm MESH OPENING, 5mm WIRE DIAMETER | SET |
| 8 | GALVANIZED RAZOR BARBED WIRE | 600mm COIL DIAMETER, 2.3mm CORE WIRE THK. AND 0.4mm 18KG/ROLL BLADE THK. 10M PER ROLL | ROLL |
| 9 | BARBED WIRE | Two strand barb wire, 2mm wire diameter | M |
